¡¡

Others

Y Resin moisture content tester

Introduction

¡¡

Product No.:SFY20A

¡¡

Product characteristic:

¡¡

Halogen moisture content tester is the new moisture content tester by our company manufactured. It adopts the advanced weighing system- the electromagnetic force balanced the sensor. Its characteristic is accurate weighting data, rapidly and clearly display, automatic detecting system, convenient automatic calibration device and overload protection device. It is a new type of speed moisture content tester. Annular Halogen lamp ensures that the sample would be received even heating, convenient operation and accurate measurement. When measuring the sample¡¯s weight, the instrument adopts the mode of an annular tube halogen heating to rapid drying the samples. In the process of drying, the Moisture tester will keep measuring and displaying the moisture content of the samples lost. When the drying process completed; the final moisture content value would be locked. Compared with the GB oven heating method, Halogen heating could even dry the samples rapidly under the high temperature, and the samples¡¯ surface would not be damaged. Its testing results are consistent with the GB oven method, it could replace the GB oven, and its detection efficiency is much higher than the oven method. Generally we need a few minutes to complete the samples testing. This instrument has the advantages of simple operation, accurate test, liquid crystal display that let the screen is more clear and bright, respectively showing the halogen value, initial value, final value, testing time, initial temperature data, final temperature data, and could be connected with the computer and printer. It fit for the printer data output of GLP request.

¡¡

Product purposes:

¡¡

The moisture content tester can be widely applied to all the industry that needs of rapid determination. Such as medicine, food, feed, seed, vegetable seed, evaporate vegetables, tobacco, chemical industry, tea, food, meat, textile, papermaking, agriculture, forestry, rubber, plastics, and other industries in the laboratory and production process. Moreover meet the moisture content testing requirements of particles, powder, solid, colloid and liquid.

¡¡

Technical parameter:

¡¡

1. Weigh scope: 100g ultra great measuring range 0.001g precision

2. Moisture content measuring range: 0.01-100%

3. Sensor precision: 0.001g (uses the electromagnetic force balanced the sensor)

4. Samples quality: 0.3-100g

5. Duplication: Initial sample weight ¡Ý2g ¡À0.05%

Initial sample weight ¡Ý5g ¡À0.02%

6. Heating temperature scope: Outset - 205¡æ

7. Analysis method: May choose 3 kind of end-point judgment way. One is completely automatic. Two is fixed time from 0.1 to 999 minute. Three is definition pattern

8. The heating source: Halogen heating moisture tester

9. Moisture content readability: 0.01%

10. Display parameter: % current moisture content, printout moisture content %, dry standard type, time, temperature, weight.

11. Communication connection: The standard RS232 communication connection for convenience connected printer, the computer and other auxiliary equipment, conforms to the FDA/HACCP form request.

12. The outlook size: 350¡Á200¡Á260(mm)

13. Electrical source: 220V¡À10 (optional)

14. FN: 50Hz¡À1Hz/60Hz¡À1Hz (optional)

15. Scale size (mm):  diameter 110