POF、PET、D955、PVC shrink film
POF, PET and D955
environmental protection shrink film
(bags, tubes) are low density (0.92)
and five-layer co-extruded produced
and have good effect in packaging
irregular products. They achieve
international environmental
protection standard and are
subjected to America and Europe
environmental protection quality
system.
Main
Features:
a. Strong toughness:
Obvious in sealing; No opening when
shrinking; High molecular structure.
b. High transparency: No eutectic
point; No pattern; High glossiness
(physical value 125).
c. High shrink ratio: 120-200℃
(Lateral 65%, Vertical above 65%);
Depend on environment temperature
d. Sealing temperature: 200-290℃.
Variable in different thickness.
e. Always keep soft at low
temperature (below -20℃); No
scratching at welding joint after
shrinking well.
f. High friction force: Wear
resistant, penetration resistant and
high toughness on product surface
after packaging. Suitable for
product packaging in all industries.
Available to roll material, rim
charge and bag material (arc bags,
special bags, flat bags, square bags
and square bottom bags).
Main Features:
Thickness:
0.015mm(15u).0.019mm(19u)，0.025mm(25u)，0.03(30u)
Width: 2-35〞inch (30mm-890mm)
Length: Roll material 500M
.1000M.1332M，1067M,800M
Bag length: 50-6000mm
Storage temperature: Below 90F
Available SGS report.
PVC common heat shrink film is
available to package product
requesting different kinds. No
over-standard in heavy metal;
Relative low shrink temperature and
high shrink speed; Usually good
effect is achieved at 80-120℃. This
product has high transparency,
clearness and high glossiness. It is
easy shrink for instant heating and
suitable for all shrinkers. This
shrink film is widely applied and
suitable for product packaging
without high requestion and low
cost, such as wooden products,
crafts gift, candle, manual book,
printing and electronics, etc. Also,
it is available to make flat bags,
arc bags, special bags and triangle
bags. Fastening packaging, beautiful
and burning resistant. No decolor at
printing.
Main
Features:
Thickness: 0.017(17u)~0.1mm(100u)；
Width: 15mm~1200mm；
Length: 250M-500M -1000M (Up to
customer)
Shrink ratio: Vertical 3%~50%;
Lateral: about 55%; Shrink
temperature: 80~150℃ in normal
machine running;
Storage temperature in transport:
About 25℃
Density: 1.4
Disadvantage: Fragile, hard (obvious
at -20℃), relative bad sealing
effect, pungent odor in burning.
Available SGS report.
