• YAKF-2011 Full-automation Carle moisture content tester

• YSKRS-07 Full-automation KASHI moisture content tester

  　

1. Testing scope: 0.001% - 100 % moisture content

2. Resolution ratio: 0.01ml

3. Titration total capacity: 20ml

4. Titration of resolution 0.01ml

5. Moisture titration repetitiveness ≤0.01

6. The linear correlation coefficient of moisture titration ≥0.998

7. High testing precision

8. Double platinum electrode polarization voltage to determine and display the reaction end point titration, termination

9. The use of sophisticated manufacturing metering tube, capacity error ≤±0.004

10. Full closed system, avoid the environmental moisture infiltration

Operation convenient

      The press-key operation

1. Press the electric key, the tester will be set up an electric circuit or interrupt.

2. Press the solvent key, the solvent will automatically inhale the reacting cup.

3. Press the discharging key, the waste solution of the reacting cup will be exhale automatically into the waste solution cup.

4. Presses the whisk key, the whisk will be begun or stop, when it began working, could press the knob to become the step less speed regulation.

5. Press the ready key, the flat throttling valve will switch automatic to be preparing. The Carle reagent will inhale automatic the tube, and be preparing for the next test.

6. Press the liquid return key, a metering tube of the reagent will automatically back into the bottle, the reagent can uniformly and balance, to ensure the accuracy of determination. If the initial phase, according to the" liquid return" key, can rise to exclude air, ensure that the test precision.

7. Press the test key, the flat throttling valve will switch automatic to be testing. the device will automatically titration, and by general titration to trace titration small trace titration in the titration process in the automatic switching, until the end of the reaction, the automatic stop titration, and automatic alarm, light display, digital display reagent capacity value.

8. Press the reset key, which can be suspended above No.5, 6, 7 in action, as a function of converting the role change.

Therefore, the operator only needs to press the function key, tester can automatically achieve the desired action, and operation is extremely simple, reliable.

The reagent bottle joint (patent No.: 289219).

The tester will use the standard pyridine reagent or non-pyridine reagent in the testing.

By adopting the high luminance digital tube, display clearly.

Once disoperation can be immediately discontinued. And will be operating again.

Protect environment and health

The fully enclosed design, pipeline system, avoids the toxic gas escape.

The waste water because of containing harmful substances, must comply with the requirements of environmental protection processing, so as to avoid the adverse impact on the environment.

Apparatus, stable operation, no noise

Related product keywords: moisture content tester, Carle moisture content tester, capacity method of moisture content tester