|
¡¡
Infrared moisture tester
YSFY20A Halogen speed moisture content
tester
¡¡
Introduction
Product No.:YSFY20A
Product characteristic:
Halogen Calefaction Speed Moisture
Content Menstruate Instrument is the new
Speed Moisture Content Menstruate
Instrument by our company manufactured.
It adopts the advanced weighing system-
the electromagnetic force balanced the
sensor. Its characteristic is accurate
weighting data, rapidly and clearly
display, automatic detecting system,
convenient automatic calibration device
and overload protection device. It is a
new type of speed moisture content
tester. Annular Halogen lamp ensures
that the sample would be received even
heating, convenient operation and
accurate measurement. When measuring the
sample¡¯s weight, the instrument adopts
the mode of an annular tube halogen
heating to rapid drying the samples. In
the process of drying, the Moisture
tester will keep measuring and
displaying the moisture content of the
samples lost. When the drying process
completed; the final moisture content
value would be locked. Compared with the
GB oven heating method, Halogen heating
could even dry the samples rapidly under
the high temperature, and the samples¡¯
surface would not be damaged. Its
testing results are consistent with the
GB oven method, it could replace the GB
oven, and its detection efficiency is
much higher than the oven method.
Generally we need a few minutes to
complete the samples testing. This
instrument has the advantages of simple
operation, accurate test, liquid crystal
display that let the screen is more
clear and bright, respectively showing
the halogen value, initial value, final
value, testing time, initial temperature
data, final temperature data, and could
be connected with the computer and
printer. It fit for the printer data
output of GLP request.
¡¡
Product use:
The moisture content tester can be
widely applied to all the industry that
needs of rapid determination. Such as
medicine, food, feed, seed, vegetable
seed, evaporate vegetables, tobacco,
chemical industry, tea, food, meat,
textile, papermaking, agriculture,
forestry, rubber, plastics, and other
industries in the laboratory and
production process. At the same time
meet the solid, particle, powder,
colloid and liquid water content
measurement requirements.
¡¡
Technical parameter
1¡¢Weigh scope: 100g ultra great
measuring range 0.001g precision
2¡¢Moisture content measuring range:
0.01-100%
3¡¢Sensor precision: 0.001g (uses the
electromagnetic force balanced the
sensor)
4¡¢Samples quality: 0.3-100g
5¡¢Duplication: Initial sample weight
¡Ý2g ¡À0.05%
initial sample weight ¡Ý5g ¡À0.02%
6¡¢Heating temperature scope: Outset -
205¡æ
7¡¢Analysis method: May choose 3 kind of
end-point judgment way. One is
completely automatic.
Two
is fixed time from 0.1 to 999 minute.
Three is definition pattern.
8¡¢The heating source: Halogen heating
moisture tester
9¡¢Moisture content readability: 0.01%
10¡¢Display parameter: % current moisture
content, printout moisture content %,
dry standard type,
time, temperature, weight.
11¡¢Communication connection: The
standard RS232 communication connection
for convenience connected printer,
the computer and other auxiliary
equipment, conforms to the FDA/HACCP
form request.
12¡¢The outlook size: 350¡Á200¡Á260(mm)
13¡¢Electrical source: 220V¡À10(for
choice)
14¡¢FN: 50Hz¡À1Hz/60Hz¡À1Hz (for choice)
15¡¢Scale size (mm): diameter 110 |
¡¡ |
