¡¡
Infrared moisture tester
YWS-2 Micro-moisture content tester
¡¡
Product introduction
This tester accords with GB6283¡¢GB/T7600
and adopts Carle Fischer coulometer
method to test the moisture of the
samples. It overcomes the low accuracy,
high quantity reagent, operation
inconvenient of the Carle Fischer
titration tester. This tester has used
the big electrolysis electric current
and the electric current automatic
control, produces the titrate through
the electrolysis (iodine), thus enables
the reagent to be possible to duplicate
the continual use, the determination
result direct digit demonstrated that
has the parsing process short (one
minute with one result), the simplicity
of operator, the precision is high,
strong automaticity and so on
characteristics, this tester is suitable
for the moisture testing in the process
of producing petroleum, chemical
product. Oil filled electrical equipment
insulation oil determination of water
content. Do the Test moisture in the
medicine, pesticides, food, explosives,
pigment, paint, mineral raw materials
and other materials.
¡¡
Technical Parameter
Display system |
Four figures in decimalized |
Unit |
µgH2O£» |
Electrolytic current |
0 ~ 300mA automatic control |
Testing scope |
5µg-80mg H2O£» |
Sensitivity |
1µgH2O £» |
Precision |
((no including sampling error)
when 5 ¦Ì g ~ 1mg ( H2O ) the
error is not more than ¡À 0.3%,
when above 1mg ( H2O ) the error
is not more than plus or minus
0.5%. |
Electric source |
220V ¡À 10% 50Hz £»power£º40W£» |
Whisk mode |
Magnetic power whisking |
Using environment |
temperature:5-40 ¡æ; humidity:
¡Ü80%£» |
Appearance size |
320*320*170mm£¬ net weight£º7kg£¬
carton packing |
¡¡
The keywords of related product:
moisture content meter, moisture content
tester, coulometer moisture content
tester, capacity moisture content
tester. |
¡¡ |