|
The production of wall paint
|
Senior interior wall
elastic emulsion
paint |
|
|
|
Product Description:
Plastic
elastic latex paint for
interior wall belongs to
high-grade interior wall
latex paint, the elastic
emulsion as the main raw
material, adding filler and
imported additives in the
production of the
elastomeric inner wall latex
paint, painting with the
film thickness and smooth,
pollution resistance, scrub
resistance, environmental
protection, impact
resistance, tensile
strength, can effectively
cover walls the tiny crack
characteristics.
|
|
|
senior latex paint
for exterior wall
|
|
 |
|
Product Description
1 has
enough strength concrete
prefabricated plate,
cast-in-place concrete wall,
brick walls, cement or mixed
mortar water content below 10 is
the construction, but not muddy
and floating dust. 2 commonly
used brush and roll coating,
general 1, 2 survived, brush
available oil brush, the
first transverse brush, second
vertical brush. The first
surface can be coated with
second (Note: coating to a
uniform coating, excellent in
dividing joint office.)3 tools
run out and rinse with water.
Note 1, not the construction,
but the summer construction
after 3 hours is not afraid of
rain.2 temperature below 5 ¡æ . 3
coating to closed storage at 0 ¡æ
environment. The 4 coating
deposition does not affect the
use, but must mix.5 Application
of: 2.5, 3.5 sq m / kg.
|
Type: green latex paint
gloss: Matt The ratio:
0.93: more than 1000
times of washing
resistance
Viscosity: resistance: ¡Ý
95KU ¡Ý 24 hours
Consumption: a theory of
value: 5-6 ©O / kg / two
times, actual brushing
area due to construction
material and decorative
effect, difference.
¡¡ |
|
|
Senior
interior
paint
¡¡ |
|
|
|
Product Description
:
Key
points of construction: 1.
Have enough strength of
concrete forms, cast-in-situ
concrete wall, the brick
wall, cement or mixed mortar
paste moisture content can
be lower than 10
construction, but may not
have dirty and float ash.
2. Construction often by
brush and roller coating,
general 1-2 way survived,
painted with big brush
available, a the horizontal
brush, brush a second way. A
the table dry after the
second word can besmear,
note: coating to uniform
coating, stay in some ',
joints.
3. After using tools with
clean water.
notes:
1. The rain is unfavorable
construction, but summer
construction 3 hours later
not afraid of the rain.
2. Less than 5 ¡æ temperature
should not be construction.
3. Coating to close down
stored in 0 ¡æ above
environment.
4. Paint does not affect the
settlement, but used to stir
well.
5. Applicable quantity:
2.5-3.5 square meters/kg or
so.
Type:
environmental protection
emulsioni paint luster:
PingGuang To better than
rate: 0.93 resistance wash
sex: frequency 1000 times
Sticky degrees: frequency 95
KU alkali resistance:
quartile 24 hours
Consumption paint quantity:
the theoretical value: 5-6 ©O
/ ©K / two times the actual
besmear brushs area in the
construction methods, base
material and adornment
effect is different
Drying time: more than 2
hours maintenance table dry
period: 7 days (25 ¡æ)
|
|
imitate
granite
coating
(external
wall) |
|
|
Product Description
Characteristics: (1) excellent
weather ability, protection and
decoration effect lasting.
(2) the alkali excellent water
resistance.
(3) natural color sand
preparation, imitation stone
effect is good, the green
environmental protection.
(4) and strong adhesion of the
substrate is good.
|
Performance index: 1,
container state after
mixing without
aggregation,
homogeneously state
2, the construction of
spraying without
difficulty
3, low temperature
stability (three
circulation) don't spoil
4, dry time (table dry)
/ h < 2
5, initial drying
resistance to no crack
6, resistance to water
96 h no abnormalities,
allow slight change
color
7, resistance to impact
and free of cracks,
flake coating and
obvious deformation
¡¡ |
¡¡ |
|
